things that affect computer performancePossible after a year we use computers, we will find there are some significant changes to the performance of our computer for example is always 'hang' or the slower the operation. If we are hardcore users, this problem would occur much earlier. Here are ten things perceived to be the source of our computers and disrupts performance. and ten points is also a basic guide or handle very well for me in the maintenance works.1. Microprocessors suffered overheating.
Overheating occurs when the cooling fan motor to the microprocessor can not function properly. This is because the dust found around the block a fan of the fan rotation. In addition, the fan bearings may be loose causing tremors occurred in the microprocessor. The result is that the microprocessor can not work properly.2. RAM problem
There is also a type of cheap RAM that does not meet specifications and having trouble composition chips that are ready built. The consequences of this problem, is prone to overheating RAM affect the ability of a computer. In addition, problems ëBlue Screenà also be more likely to occur.3. Hard disk
For hard drive, the problems that lead disrupts the performance of computers is growing sectors such as damaged (bad sectors) when doing the chkdsk and scandisk, internal damage (intermittent), which resulted in the failure of the boot process and access to low-spin at the time that may not in accordance with the specifications of the computer used.4. BIOS Setup
Computer users should not be too dependent on the configuration of the BIOS 'factory' instead should determine the optimum system configuration. This is due to incorrect BIOS configuration also affects the ability of a computer.5. Discs
Cable guards are used to meet the specifications of the disk controller is installed. Similarly, the mother board (motherboard) to be able to support the disk controller. For example, UDMA-66 disk controller requires a special card to be installed on the motherboard only supports UDMA-33 disk controllers. If not installed, it would invite problems for computer performance.6. Operating Systems
Operating systems like Windows XP and Windows 2000 usually have a lot of service work. Service-a service run if too much will inhibit the performance of the computer. Services are rarely used should be dismissed because it is much use of computer resources.7. Processes and Applications
Process and Application (. Exe) that too much use would cause the computer to be slow. To see the process and the application being run, the user can click on the Windows Task Manager.8. Disk Fragmentation
Disk fragmentation occurs when files are frequently stored, deleted and changed. This causes the contents of files scattered in the sector. Fragmentation also occurs when the contents of the disk is full. Space should be 20% to 25% to be provided to reduce this fragmentation.9. Application background
Many users who like to run background applications automatically after the initial boot or operating system. Applications that run on too much at one time will cause the computer to be slow and sometimes lead to 'hang'. The applications that used this can be seen in the Startup folder.10.System file
In Windows operating systems, especially NT and 2000, the selection of the file system is NTFS and FAT are very important. This is because the file system refers to the size and number of groups in a disk. Large group size will increase computer performance. Normally, NTFS file systems have a larger group sizes than FAT
Overheating occurs when the cooling fan motor to the microprocessor can not function properly. This is because the dust found around the block a fan of the fan rotation. In addition, the fan bearings may be loose causing tremors occurred in the microprocessor. The result is that the microprocessor can not work properly.2. RAM problem
There is also a type of cheap RAM that does not meet specifications and having trouble composition chips that are ready built. The consequences of this problem, is prone to overheating RAM affect the ability of a computer. In addition, problems ëBlue Screenà also be more likely to occur.3. Hard disk
For hard drive, the problems that lead disrupts the performance of computers is growing sectors such as damaged (bad sectors) when doing the chkdsk and scandisk, internal damage (intermittent), which resulted in the failure of the boot process and access to low-spin at the time that may not in accordance with the specifications of the computer used.4. BIOS Setup
Computer users should not be too dependent on the configuration of the BIOS 'factory' instead should determine the optimum system configuration. This is due to incorrect BIOS configuration also affects the ability of a computer.5. Discs
Cable guards are used to meet the specifications of the disk controller is installed. Similarly, the mother board (motherboard) to be able to support the disk controller. For example, UDMA-66 disk controller requires a special card to be installed on the motherboard only supports UDMA-33 disk controllers. If not installed, it would invite problems for computer performance.6. Operating Systems
Operating systems like Windows XP and Windows 2000 usually have a lot of service work. Service-a service run if too much will inhibit the performance of the computer. Services are rarely used should be dismissed because it is much use of computer resources.7. Processes and Applications
Process and Application (. Exe) that too much use would cause the computer to be slow. To see the process and the application being run, the user can click on the Windows Task Manager.8. Disk Fragmentation
Disk fragmentation occurs when files are frequently stored, deleted and changed. This causes the contents of files scattered in the sector. Fragmentation also occurs when the contents of the disk is full. Space should be 20% to 25% to be provided to reduce this fragmentation.9. Application background
Many users who like to run background applications automatically after the initial boot or operating system. Applications that run on too much at one time will cause the computer to be slow and sometimes lead to 'hang'. The applications that used this can be seen in the Startup folder.10.System file
In Windows operating systems, especially NT and 2000, the selection of the file system is NTFS and FAT are very important. This is because the file system refers to the size and number of groups in a disk. Large group size will increase computer performance. Normally, NTFS file systems have a larger group sizes than FAT
Ulasan
Catat Ulasan